Machine Operations Toolbar

new_machine_ops_2008.jpg

The Machine Operations Toolbar contains the following shortcut buttons:

tracedesign.gif

Trace Design - Commands the machine to trace the current design

applique.gif

Applique - Commands machine to push hoop forward (used for manual applique)

centerhoop.gif

Center hoop - Centers the hoop on the machine

returnorigin.gif

Return to origin - Returns the machine to the origin of the current design

resetdesign.gif

Reset design - Resets the sewing of your design

trimimmediate.gif

Trim immediate - Commands the machine to perform a trim

sewnstitches.gif

Displays stitches sewn - Only displays stitches already sewn (on your computer screen)

resetall.gif

Reset all - Resets the sewing of your design on all machines in the selected cluster

test_sew_out_mode_.jpg

Test Sew Out Mode - Commands the machine to perform a test sew out. When this is activated, machine activity is logged as test data instead of production data.

You can toggle the machine bar by selecting View->Toolbars->Machine Operations Toolbar.