Move to Last Origin

This tool gives you the ability to recover to the exact same starting point of a design origin if for any reason (e.g., power failure) the machine was restarted while sewing a design.  The following procedure must be followed for the tool to work correctly.

1. After loading a design, the hoop MUST be centered before sewing.

2. The hoop can then be jogged or moved for alignment purposes.

3. Start sewing the design.

4. If for any reason the machine or the computer must be restarted, e.g., loss of power, restart AMAYA OS and the AMAYA machine(s).

5. Load the design and center the hoop.

6. Click on the Tools menu and then click on Move To Last Origin. The machine(s) will move to the last starting position.

7. Frame forward or use the Move to Stitch functions to move forward in the design to the desired starting stitch.