Note: Reduce torque specifications when attaching optical sensors by 10% to prevent damage to the sensor housing. Use minimum torque when screwing into or clamping plastic surfaces.
The following chart depicts the torque specifications for all screws and nuts used in the AMAYA Embroidery Peripheral. They should be followed unless indicated otherwise in this Manual (i.e., screws going into plastic materials require lighter torque).
|
|
Note: Reduce torque specifications when attaching optical sensors by 10% to prevent damage to the sensor housing. Use minimum torque when screwing into or clamping plastic surfaces. |
|
Size |
Min |
Max |
Min |
Max |
|
In-lb |
In-lb |
N-m |
N-m |
|
|
Zn Plated, Property Class 8.8, Socket Head Screws (Melco PN: 010170-XX, 010171-XX, 010172-XX, 010174-XX, 010175-XX) |
||||
|
M2.5 |
5 |
7 |
0.66 |
0.80 |
|
M3 |
10 |
13 |
1.2 |
1.4 |
|
M4 |
23 |
26 |
2.6 |
3.2 |
|
M5 |
46 |
56 |
5.1 |
6.3 |
|
M6 |
79 |
96 |
8.9 |
10.9 |
|
M8 |
190 |
234 |
21.6 |
26.4 |
|
Zn Plated, Property Class 4.5, Slotted and Phillips Machine Screws (Melco PN: 006558-XX, 004262-XX, 009862-XX, 009863-XX) |
||||
|
M2.5 |
1 |
2 |
0.19 |
0.23 |
|
M3 |
3 |
4 |
0.40 |
0.48 |
|
M4 |
8 |
10 |
0.92 |
1.12 |
|
M5 |
16 |
19 |
1.8 |
2.2 |
|
M6 |
27 |
33 |
3.1 |
3.7 |
|
M8 |
45 |
55 |
5.1 |
6.3 |
|
Black Oxide, Property Class 12.9, Black Socket Head Screws (Melco PN: 01922-XX, 67018-XX, 671852-XX, 671686-XX, 671687-XX, 003183-XX) |
||||
|
M2.5 |
10 |
12 |
1.2 |
1.4 |
|
M3 |
18 |
22 |
2.1 |
2.5 |
|
M4 |
43 |
51 |
4.7 |
5.8 |
|
M5 |
83 |
100 |
9.4 |
11.4 |
|
M6 |
144 |
175 |
16.2 |
19.8 |
|
M8 |
345 |
418 |
38.7 |
47.3 |
|
Set Screws, Property Class 45H (Melco PN: 10188, 01962-XX, 005034-XX, 001960-XX, 10635-XX, 001971-XX) |
||||
|
M3 |
4 |
5 |
0.45 |
0.55 |
|
M4 |
8 |
10 |
0.90 |
1.10 |
|
M5 |
24 |
29 |
2.7 |
3.3 |
|
M6 |
40 |
48 |
4.5 |
5.5 |
|
M8 |
80 |
97 |
9 |
11 |
|
Zn Plated, Property Class 8.8, Low Profile Socket Head Screws (Melco PN: 30750-XX |
||||
|
M4 |
23 |
28 |
2.61 |
3.19 |
|
Black Oxide, Property Class 10.9, Flat Head Socket Screws (Melco PN: 001935-XX, 007443-XX) |
||||
|
M3 |
15 |
19 |
1.73 |
2.11 |
|
Zn Plated, Property Class 10.9, Flat Head Socket Screws (Melco PN: 011197-XX, 011198-XX) |
||||
|
M4 |
34 |
40 |
3.77 |
4.61 |
|
M5 |
65 |
78 |
7.29 |
8.91 |
|
Zn Plated, Property Class 12.9, Flanged Socket Head Screws (Melco PN: 30790-XX) |
||||
|
M4 |
40 |
48 |
4.45 |
5.45 |
|
Stainless Steel, Property Class 10.9, Button Head Cap Screws (Melco PN: 011161-XX, 011162-XX, 011163-XX) |
||||
|
M3 |
15 |
19 |
1.73 |
2.11 |
|
M4 |
34 |
40 |
3.77 |
4.61 |
|
M5 |
65 |
78 |
7.29 |
8.91 |
|
Zn Plated, Property Class 04, Metric Hex Nuts (Melco PN: 680430-XX) (Torque based on screws they attach to) |
||||
|
M4 |
23 |
28 |
2.6 |
3.2 |
|
M5 |
46 |
56 |
5.2 |
6.3 |
|
AMAYA/Melco Specific and Custom Hardware |
||||
|
NDL Plate Screw, PN: 004643-01 |
8 |
10 |
0.92 |
1.12 |
|
Self Tapping Plastic DURO Screw, PN: 30737-01 |
8 |
10 |
0.9 |
1.10 |
|
M6 Lock Nut PN: 005284-01 |
Install nut until it makes contact with the spring washer, then turn nut another half turn. |
|||
|
M4x0.7 Nylock Nut PN: 003573-04 |
No torque specification for this nut. Turn nut until specified belt tension is achieved. |
|||