Head Timing Menu

The Head Timing menu contains the commands used to conduct head timing and maintenance functions.

Figure 1 Head Timing Menu

For an explanation of each of the menu items, click the item in the above image (Figure 1).

Head Timing Keypad Functions

When the Head Timing tab is open in AMAYA OS, several special keypad functions are available. These keypad functions are only available when the Head Timing tab is open. The following table describes these functions:

Function	Press these key(s)	Keypad Pictures	Notes
To go to the Head Up position	Adjustment + Up Arrow
To go to the Bottom Center position	Adjustment + Down Arrow
Rotate hook forward	Adjustment + Right Arrow		Rotates hook in (approximately) 20 degree increments
Rotate hook forward	Hoop + Down Arrow		Rotates hook forward in 1 degree increments
Rotate hook backward	Hoop + Up Arrow		Rotates hook backward in 1 degree increments
Microstep hook forward	Trace + Up Arrow		Rotates hook forward in .10 degree increments
Microstep hook backward	Trace + Down Arrow		Rotates hook backward in .10 degree increments
Head Up, Bottom Center	Frame Back		Always starts at needle one. When this key is pressed once, machine goes to Head Up position twice, then goes to Bottom Center. When the Frame Back key is pressed again, the machine color changes to the next needle, then goes to Bottom Center on that needle.