Looping Test

bar.bmp

amloop01a.jpg

Figure 1 - Looping Test Design

 

The looping test design is used to test the reliability of the AMAYA on fills and column stitching.  There should be no looping in the fills, thread breaks, pull-outs, or any irregularity in the triangles when viewed at arms length with an unaided eye.

The looping test should be sewn on one layer of white broad cloth (Melco PN: 344754-01) (or any white polyester material) or the equivalent with one layer of backing (ARC PN: C20162210).

Test Designs Index