Registration Test

bar.bmp

amrtest01a.jpg

Figure 1 - Registration Test Design

 

The registration test design is used to verify the repeatability of stitches and to ensure that the adjustments to the x- and y-axis is correct.  There should be no missed stitches, and the repeatability should be within one stitch point (=0.1mm).  This should all be done with no thread breaks or pull-outs.

 

The registration test should be sewn on one layer of white broad cloth (Melco PN: 344754-01) (or any white polyester material) or equivalent with one layer of backing (ARC PN: C20162210).

 

Test Designs Index