The following information will help you to setup/install your AMAYA and sew your first design. The information is laid out in a "step by step" approach with each numbered section a stand alone set of instructions. The following is a brief overview of each section.
This section covers unpacking of the AMAYA
The remain steps will utilize tools found in your operator's kit. for descriptions of the contents, please see this section.
This section covers cart assembly
This section specifically covers the network setup and special environmental settings for AOS in a windows environment. At this point, you should already have your software installed (using the printed software installation instructions included with your AMAYA found in the plastic packet taped to the base cover of the machine. click Machine Overview to see where the base cover is located).
This section covers network cable and power cord installation.
This section covers the initial or first time power up.
This section covers "how" to thread the upper thread path of your AMAYA machine.
This section covers "how" to thread the lower or "bobbin" thread of your AMAYA machine.
This section will link you to the maintenance section of the manual, specifically, the lubrication schedule. It also points out where to find the "maintenance timers" that you will use to keep your AMAYA in proper working order by ensuring that all necessary lubrication points on the machine are properly lubricated.
This section will walk you through sewing your first design.